S9 HeliosPower for your plans. Room for the unexpected.

S9 Helios

Your readings are here whenever you open the app. Updates usually arrive every 15 minutes.

Loading your monitor…

Checking your sign-in and loading your readings.

Reload app

Your readings are private to your S9 account. Your Wi-Fi password stays on the monitor. Privacy & your choices.

Battery details

Electrical & daily details
Battery power
Voltage / current

At the last update. Battery level and time left are estimates. Balance is energy in minus energy out, not an exact change in stored charge.

Wh means watt-hours: the amount of energy measured.

Settings

Chart times use this timezone. Your choice is saved on this browser.

Weekly report

Solar in · Battery balance · Battery level

After 9 p.m. in your time zone

A summary of battery reserve, solar collected and how collection compares with previous recordings. Weekly is the default; choose Daily for more frequent updates. Tap the notification to open your reports.

Previous 5 reports

Open to view the previous five reports.

How to read this report

Building reserve means more energy entered the battery than it supplied. Keeping up means charging and battery use were roughly balanced. Using battery reserve means battery use exceeded charging. Battery balance is measured energy in minus energy out, not solar minus battery use or a precise change in stored capacity.

Weekly reports compare total solar collection with the previous complete week of the same length, to the nearest 0.01 Wh. Daily solar collection is compared with the average of at least three complete days among the previous seven evening periods of the same length. Each comparison day needs at least 99% solar readings. For daily reports, a change must exceed both 25% and 0.10 Wh to be labelled higher or lower. This describes collected energy, not sunshine quality or a weather forecast. Shade, panel position, a full battery or charging limits can also affect collection. Missing readings are never filled in.

Extra-device estimate

The budget is extra energy per day alongside your existing load, for similar solar conditions and usage. It is a planning estimate, not a guaranteed maximum or a winter rating.

An early estimate starts after one complete day with 99% coverage and battery reserve that is not falling. With fewer than seven days, it uses all consecutive complete days. With more history, it uses the weakest seven-day balance within up to 28 days. Similar recent sunlight is not a guarantee of future conditions. It allows 10% charging loss, 20% conversion loss, a small measurement allowance, and keeps half the remaining margin in reserve. These are planning assumptions, not measured efficiencies.

Use only for solar-only charging with an unchanged setup. USB charging, different equipment or changing seasons need a fresh assessment. A full battery can limit solar collection, so unused panel capacity cannot be inferred from a full battery alone.

Compare the actual daily device energy with the budget: 5 V × average current in amps × hours used = Wh. Startup and peak current must also fit the supply. Trial any extra load and watch battery reserve.

Sign-in & monitors

+ Add device

Wi-Fi & monitor

Connect your device to change Wi-Fi, Bluetooth, monitor options or updates.

Open monitor settings

Help with my account & monitors

New phone or reinstalled app? Sign in with the same email and enter the six-digit code we send. Your monitors and saved readings return. You do not need to add them again.

Add another monitor: connect your new monitor and use the same email. Pick a monitor from the Monitor list.

Giving it to someone else? Download any readings you need, then use Settings → Sign-in & monitors → Remove or transfer monitor. You may be asked to sign in again. Removal deletes that monitor’s remote history and reports; its Wi-Fi settings and locally saved readings remain. The new owner connects Nearby and verifies their own email.

Already linked or no access to the old email? A restart or Wi-Fi change does not release ownership. Contact support for an ownership check. Never send your email verification code or Wi-Fi password.

Email, setup & transfer help · Privacy & deletion choices

How remote viewing works

Your monitor sends an update about every 15 minutes while it has internet. These updates do not send notifications. If you turn on reports, choose a weekly Sunday summary or a daily evening report for each monitor on each enabled device. Signing out stops reports on that device. Opening this page shows the latest saved readings and does not start Live View.

If the internet drops, your monitor keeps recording locally. Recent saved readings catch up when it reconnects. Gaps in the graph mean no reading was received for that time.

Battery used today counts energy taken from the battery. It can stay unchanged while charging; charging never subtracts from it.

Online history keeps 30 days of detailed readings and one year of daily summaries. Local history on your monitor stays available separately.

Sending account updates uses extra battery power. For fast readings while positioning a panel, use nearby Live View.

Email support · Help & troubleshooting

Remove this monitor?

will leave your account. Someone connected nearby can then add it to theirs.

Its saved remote history and daily reports will be deleted. Download any readings you want first. Wi-Fi settings and readings stored on the monitor itself are not erased.