S9 HeliosPower for your plans. Room for the unexpected.
Connecting

S9 Helios

Connect your device for live readings or to change its Wi-Fi. Your account keeps your saved readings.

S9 Helios

Connecting your device…

Connecting to your monitor.

Settings & connections

Your Wi-Fi password stays on the monitor. Privacy & your choices.

Battery details

Electrical & daily details
Battery power now
— W
Voltage / current
— V · — mA

Battery level and time left are estimates.

Wh means watt-hours: energy measured. Battery balance is energy in minus energy out, not an exact change in stored charge.

Solar details

Electrical & daily details
Voltage / current
— V · — mA

Power coming from your solar panels.

Small readings near zero can be sensor offset or a small reverse current. A minus sign shows the measured reverse direction; it does not mean the reading is missing. mA means milliamps (1,000 mA = 1 A).

Wh means watt-hours: energy collected. The daily total above uses the same reading as your card.

Monitor settings

Changing the measurement point or direction starts new totals. Renaming alone keeps them.

Settings

Chart times use this timezone. Your choice is saved on this browser.

Wi-Fi & Bluetooth
This device

Choose a connection

Use Bluetooth

Home Wi-Fi optional

Add your home network here. You can keep watching over Bluetooth while it connects.

Use your home Wi-Fi

Your phone or PC can stay on its usual network.

Choose your network

Use a 2.4 GHz home network. Networks that need a browser sign-in or a work/school username are not supported.

Can’t reach the monitor?

Join the monitor’s S9-Energy Wi-Fi using password S9Energy2026, then open http://192.168.4.1.

In battery-saving mode, the monitor’s own Wi-Fi appears during its connection windows. Start Live View before changing settings. If your phone reports “No internet”, stay connected while setting up.

Monitor PIN

One six-digit PIN for updates, monitor settings and Bluetooth pairing.

Use six digits. Changing the PIN removes saved Bluetooth pairings. Reconnect with your new PIN. Wi-Fi settings and energy totals stay saved.

Forgot a changed PIN? See Help → Bluetooth PIN recovery.

Daily report

One evening report: solar in, battery out and battery level. Manage notifications in your app.

Turn daily report on / off
Advanced monitor options

Sign-in & monitors

How can we help?

Tap a topic for the steps.

Connect my monitor

Android or computer: open this website in Chrome (or Edge on a computer), tap Bluetooth and choose S9-Energy. The starting PIN is 123456.

Keep it powered on and nearby. In Battery Saver, leave the chooser open for up to five minutes. Use one phone or computer at a time.

iPhone or iPad: follow “Connect with iPhone” below.

Set up home Wi-Fi

Add your home network

Connect to the monitor first. Use 2.4 GHz Wi-Fi.

  1. Open Menu → Settings → Wi-Fi & Bluetooth and choose your network.
  2. Enter its password and tap Connect to Wi-Fi. Wait up to 35 seconds.
  3. When connected, put your phone on the same Wi-Fi. Tap Use Wi-Fi and bookmark that page.
First Wi-Fi connection

Use the monitor’s Wi-Fi

  1. Power on the monitor. Within five minutes, join S9 Helios or S9 Monitor in your phone’s Wi-Fi settings. Password: S9Energy2026.
  2. Stay connected if it says “No internet”. A Wi-Fi form opens on supported phones. Otherwise open http://192.168.4.1/ in your browser. If it does not open, use the Router address in that Wi-Fi network’s details.
  3. Choose your home Wi-Fi and enter its password. If you see readings instead, tap Menu → Settings → Wi-Fi & Bluetooth. Choose Add to my account to prepare your account link. If you are using setup Wi-Fi, return your phone to home Wi-Fi or mobile data, then choose Finish setup. Verify your email if asked. No setup card is needed.

Choose Wi-Fi Ready in Settings for everyday access.

Connection modes & waiting times

Connect using the monitor’s current mode, then open Menu → Settings → Wi-Fi & Bluetooth → Connection mode, choose a mode and save. The Wi-Fi and Bluetooth buttons on the start page only choose how this phone connects; they do not change the monitor’s mode.

Battery Saver offers about 30 seconds to connect every five minutes. Your phone cannot wake it between windows. After connecting, the page shows the next expected window; a fresh page cannot know the exact time. A restart or Live View can change it. Ready modes do not have this wait.

Position my solar panel with Live View
  1. Connect and tap Start Live View.
  2. Move the panel a little, avoid shade and compare Solar power now. Higher means more power at that moment.
  3. Tap Finish Live View when done. It also stops after five minutes.

Live View uses much more battery power. Use it briefly for panel placement or troubleshooting.

Home Wi-Fi, another phone & mobile data

Join the same home Wi-Fi as your monitor and open its bookmarked readings page. You do not normally join an S9-Energy network; that network is for setup.

For another phone, open Menu → Settings → Wi-Fi & Bluetooth → Address for another phone or PC → Copy address on a connected device. Open that address on the new phone and bookmark it. Each browser keeps its own saved links.

These nearby readings open directly from your monitor. Away from home, use remote viewing after its one-time setup.

Wi-Fi will not connect

Check the password, use a 2.4 GHz network and move closer to your router. Open Menu → Settings → Wi-Fi & Bluetooth to check progress. Use Change network to correct the details.

Your phone must be on the same home network to open the monitor’s page. Guest Wi-Fi and networks with a browser sign-in may not work.

Install the app

Install your device’s app. It works alongside S9 Pixmob.

Install the app

Use Chrome on Android, then tap Install the app. Sign in with the same email to restore your monitors.

Email sign-in, new phones & more monitors

First setup: save your home Wi-Fi, then choose Settings → Account updates → Add to my account. Enter your email, tap Email me a code and continue to Remote to enter the six-digit code. It expires in 15 minutes and works once. Use another email / resend if you need a fresh code.

On a new phone or after reinstalling, sign in with the same email; your existing monitors return. For a new monitor, repeat Add to my account Nearby with that same email. Use the Monitor list in Remote to switch units.

Check spam or junk if the email is missing. Never send a verification code to support. More sign-in help

Remove, transfer or recover ownership

The owner can select the monitor in Remote, then choose Settings → Sign-in & monitors → Remove or transfer monitor. A recent email sign-in and confirmation are required. Download any readings you need first.

Removal deletes remote history and reports. Wi-Fi settings, lifetime totals and locally saved readings remain on the monitor. Contact S9 before handing it over if you need local information cleared. The new owner then connects Nearby and uses their own email. A restart or Wi-Fi change does not release ownership.

If you cannot access the owner’s email or the previous owner is unavailable, contact S9 for an ownership check. Transfer steps · Privacy & deletion

View away from home

Account updates: see saved solar and battery readings on iPhone or Android, including over mobile data. Your monitor stays connected to home Wi-Fi with internet and uploads about every 15 minutes.

Open remote viewing and use your S9 sign-in. First time? Open Settings → Account updates → Add to my account, enter your email and verify the code we send. Use the same email for another monitor or a new phone. You never need to keep a setup code.

The page shows when readings were last uploaded. Opening it does not start Live View. Uploads use some extra battery power. If your monitor needs its factory remote setup, contact support.

Understand my battery estimate

Battery level uses the battery capacity configured for your unit: 3,500 mAh for one cell or 10,500 mAh for three parallel cells. The monitor checks for a steady finish to charging for about five minutes and corrects its estimate near full and empty. It also checks during light use. Checking… means it is adjusting the estimate. Green means high charge, amber means low, and red means very low. The percentage uses five-percent steps and can adjust after a restart or a gap in readings. Time left needs at least 30 minutes of normal battery use, then smooths several hours of readings. During Live View it shows the estimate for when Live View is off. Each connection mode learns separately. It stays blank while charging or when use is too small to estimate.

Sunlight, temperature, battery age and what you power can change battery life.

Read my saved graphs

Today, Week, Month and Year show saved solar and battery readings. Gold is solar; blue is battery. Choose Power or Battery level under Show. Tap the graph for a reading and its time. Voltage and current graphs are under More details & downloads. Battery charging is above zero and battery use is below zero. Longer energy views show the net amount charged or used in each interval.

Battery history starts with the update that adds it. Readings stay on your monitor: minute details for 24 hours, hourly summaries for 30 days and daily summaries for a year. Gaps are left blank. Download readings includes both connections.

Solar power is zero

Zero can be normal at night, in shade or when the battery stops accepting charge. If you expect power in good sunlight, email support with a screenshot.

Saved readings and downloads

Detailed readings stay for 24 hours, hourly summaries for 30 days and daily summaries for a year. Recording continues while the page is closed.

Readings save every five minutes. Use Menu → Settings → Advanced monitor options → Save before unplugging to keep the latest ones, or Download readings to save a copy.

After a full power loss, connect once to set the clock if Wi-Fi has not set it. Gaps mean no reading was recorded. For these detailed readings, connect nearby or on the same home Wi-Fi. Account updates keeps separate online history: 30 days of quarter-hour readings and a year of daily summaries.

I forgot my Bluetooth PIN

New monitors start with 123456. If you changed it and cannot remember it, email support. After changing a PIN, forget S9-Energy in your phone’s Bluetooth settings and connect again.

Signal Nine Sentinel Inc.

Still need a hand?

Tell us what happened. A screenshot helps.

Email supportsupport@s9sentinel.com

Reset totals?